colorless or light-color sticky liquid decolorant for textile waste water decolor agent for dyeing waste water treatment
Specifications:
| CAS No. | 55295-98-2 |
| Main Components | dicyandiamide formaldehyde resin |
| Appearance | colorless or light-color sticky liquid |
| Dynamic viscosity (mpa.s,20°C) | 10~200 |
| pH (30% water solution) | <3 |
| Solid content % ≥ | 50 |
| Feature | Cod remove better (about 60%) |
| Note: ourproduct can be made upon your special request. |
Usage:
- Water Decoloring Agent is mainly used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.
- Water Decoloring Agent can also be used to treat waste water from textile industry and dye houses, pigment industry, printing ink industry and paper industry.
- Water Decoloring Agent also can be used in the production process of paper&pulp as retention agent.
Water Decoloring Agent should be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water; The pH value of the waste water should be adjusted to 7-10 for better result. When the colority and COD are relatively high, Water Decoloring Agent can be used with the help of poly aluminum chloride, but not mixed together. In this way, the treatment cost can be lowered.
Application method and notes:
1. CW-08 shall be diluted with 10-40 times water, then added to the wastewater directly. After stirring for several minutes, the clear water will be got by precipitation or air-floatation.
2. Accepted the optimized pH of the wastewater to 6-10.
3. It is recommended to use this product with the inorganic flocculants to treat the effluent with high color and COD to reduce the operation cost. The order and proportion of agent dosage depend on the flocculation test and the effluent treatment process.4. The product is nonflammable and unexplosive.
5. CW-08 would show layer separation and become white at low temperature. There is no negative impact on the usage after mixing up.
Advantage:
1.Strong decolorization
2.It can remove COD better(about 60%)
3.Faster sedimentation, better flocculation
4.Non-pollution(no aluminum, chlorine, heavy metal ions ect.)
Package and Storage:
1. Harmless, non-flammable and non-explosive.Don't place it in the sun.
2. 30kg, 50kg, 250kg ,1000kg, 1250kg plastic drums or IBC tankor. Also can according to your requirements.
3. This product will appear layer after a long-term storage, but the effect will not be affected with stir. Storage temperature: 5-30°C
Product Tags:
|
|
Colorless / Light-Color Sticky Liquid Decolorant Textile Dyeing Wastewater Treatment Images
|
