Tannery Wastewater Treatment Chemical , CW -08 Colour Removing Agent
Specifications:
| Appearance | Colorless or light-color sticky liquid |
| Solid Content: | ≥50% |
| Specific Gravity at 20°C | 1.1-1.3 |
| PH Value (30% Solution) | 3-5.0 |
| Viscosity(25°C,mpa.s) | 50-500 |
| Solubility | Soluble in Water absolutely |
Advantage:
manufacturer
free sample for you
Can remove color also can reduce COD
Strong decolorization (85-95%)
Faster sedimentation, better flocculation
NO aluminum, chlorine, heavy metal ions,etc
Applications:
1. It is mainly used for waste water treatment for textile, printing, dyeing, paper-making, mining, ink, and so on.
2. It can be used for color removal treatment for high-colority waste water from dyestuffs plants. It is suitable to treat waste water with activated, acidic and disperse dyestuffs.
Application Method:
1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water.
2. The pH value of the waste water should be adjusted to 7~8 for better result.
3. When the colority and CODcr are relatively high, it can be used with the help of polyaluminum chloride(PAC), but not mixed together. In this way, the treatment cost can be lower. Whether polyaluminum chloride is used earlier or afterwards depends on the flocculation test and the treatment process.
Package and Storage:
1.It is harmless, non-flammable and non-explosive, it can not be placed in the sun.
2. It is packed in plastic drums with each containing 30kg, 50kg, 250kg , 1000kg, 1250kg IBC tank or others according to your requirements; One container could load 20~23 tons.
3. This product will appear layer after a long-term storage
Product Tags:
|
|
Tannery Wastewater Treatment Chemical , CW -08 Colour Removing Agent Images
|
